Indian Folsom Prison Series Handlebars
See below for specs compared to the stock handlebar.

• 1 design compatible with Challengers, Pursuits and 18-up Chieftains and Roadmasters.
• The Interior has been smoothed out to lessen the likelihood of wire snags and damage.
• The 1.5" fatties provide plenty of space for all those wires.
• We allocate 5% of our sales to support veteran organizations that are committed to transforming the lives of veterans.

---

Handlebar Specs:

Bar*	Height**	Width	Pullback	Sweep	Clutch, Brake, Wire Req
Stock	3"	33.25"	15.5"		Stock
+4	7"	36.5"	15.5"	26°	Stock
+6	9"	36.5"	15.5"	26°	Stock
+8	11"	36.5"	15.5"	26°	Stock
RR +4***	7.75"	36.75"	17.5"	26°	Stock

*The bar designation (+4, +6, +8) is how much higher the grips are than stock.
**The height is measured with the bars installed at 25°.
***RR +4 is our reduced reach bar which has 2 more inches of pullback if you want the bars closer. They can be found here.

---

Height

• The vertical distance between the centerline of the base bar to the centerline of the grip

*Some manufacturers designate the height of the bar from the highest point of the peek. Ours is measured to the grip.

Width

• The distance from the end of one grip to the end of the other.

Pullback

• The horizontal distance between the centerline of the base bar to the end of the grip.

Sweep

• The degree of angle between the base bar and the grip.